STEP BY STEP INSTRUCTIONS FOR INTERNET DOWNLOADING OF OUR PRODUCTS:

We recommend you stop any Registry protection utilities before attempting to install as they can prevent the application from installing correctly. If you are running Windows 2000 or Windows XP you must log on to your PC using an Administrator account

Just print these instructions and when finished, return here --> http://www.lienwriter.com/softwareupdates.htm

Step 1:  Visit http://www.lienwriter.com/softwareupdates.htm

Step 2:  Click   under the program

version that your company utilizes or desires.

Step 3:  Click Save

Step 4:  Click Save to the Windows Desktop

Step 5:  Click Yes if prompted

Your program will start downloading.

Step 6:  Once the download is complete click Open

After selecting Open, you will see the Program Welcome screen.

Step 7:  Click Next

You will now come to the License Agreement Screen.

Step 8:  First click Yes you agree, and then click Next

Step 9:  Choose the default location by clicking Next

Step 10:  Click Next to create a shortcut on your desktop

Step 11:  Click Next to confirm your Setup Settings

Lien Writer™ will begin copying your files.

Step 12:  Once the files are copied, click Next

Step 13:  First Click Yes to Launch the program file, then click Finish

Step 14:  After reading See Help file for Information, click Ok

Step 15:  Contact:  PASE Software, LLC at (916) 941-9961 for Registration Codes

Step 16:  After receiving your codes, Click Register Program

Step 17:  After reviewing the Program Information, click Continue

The program will automatically Re-Index your data tables

See next page if you cannot locate your Data!

Lien Writer Only:

If Lien Writer™ does not find your data from the previous version:

Step 1:  Click past the Company Setup screen (Close at the bottom right)

Step 2:  Click past the Printer Setup screen (Close Screen at the bottom)

Step 3:  Click Ok past the Tip of the Day

Step 4:  Go to the Setup drop down menu and click Update Data from Previous Version

Step 5:  Click Ok at Append records from Previous Version of Program!

Step 6:  Locate the Drive which your Lien Writer™ data was previously saved.  Click the correct Drive at the bottom of this screen.  Once the Drive is reselected, Locate your Lien Writer data which is normally the first odd number Such as:  _1hvoh524524 which is located above the Send, Receive, and Backup folders.  See picture for example:

Step 7:  Double Click the Data folder so it looks open (the folders below should disappear when double clicking).  Click Select once the folder is open.

Step 8:  You will come to a prompt that says Add Records from the Current Liens Table?  Click Ok

Final Step:  It will begin asking questions which you will Click Yes through every prompt as done above in Step 8.

Contact Lien Writer™ Technical Support if you have any difficulty during this process:

(916) 941-9961